СТАНДАРТЫ ЗАРУБЕЖНЫЕ И МЕЖДУНАРОДНЫЕ
Фильтр по проектам
DS DS/EN 10244-6 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Pa...
DS DS/EN ISO 8504-2 Preparation of steel substrates before application of paints and related...
DS DS/EN 10303 Thin magnetic steel sheet and strip for use at medium frequencies
DS DS/EN 10202 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium...
DS DS/EN 12536 Welding consumables - Rods for gas welding of non alloy and creep-resisting ste...
DS DS/EN 12560-4 Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corru...
DS DS/EN 12560-5 Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metal...
DS DS/EN 12560-2 Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spira...
DS DS/EN 13246 Packaging - Specification for tensional steel strapping
DS DS/EN 13247 Packaging - Specification for tensional strapping for lifting, lashing and secu...
DS DS/EN ISO 15974 Closed end blind rivets with break pull mandrel and countersunk head - AI...
DELPHI DX900119 SCAB CORROSION CREEPBACK OF PAINT SYSTEMS ON METAL SUBSTRATES
DS DS/EN ISO 15973 Closed end blind rivets with break pull mandrel and protruding head - AIA...
DS DS/EN ISO 8442-7 Materials and articles in contact with foodstuffs - Cutlery and table ho...
DS DS/EN 10241 Steel threaded pipe fittings
DS DS/EN 13173 Cathodic protection for steel offshore floating structures
DELPHI DX900016 SPOT TEST ETCH SUSCEPTIBILITY OF STAINLESS STEEL
DELPHI DX900113 THERMAL SHOCK TEST FOR PAINT ADHESION
DIN 59200 Hot rolled wide steel flats - Dimensions, mass and tolerances
DIN 18807-3/A1 Trapezoidal sheeting in building - Steel trapezoidal sheeting - Analysis, structural and de...
DIN 59200 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dime...
DIN EN 12560-4 Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corru...
DIN 7989-2 Washers for steel structures - Part 2: Product grade A
DIN 28007-2 General tolerances for glass-lined - Part 2: Steel columns for use in process engineeri...
НАШ СПЕЦИАЛИСТ ПОМОЖЕТ ВАМ