Подбока проектов по запросу:

AWWA C905 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. (35... AWWA C214 ADD A Tape Coating Systems for the Exterior of Steel Water Pipelines ASTM A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Pro... ASHRAE OR-10-033 Compensation of Manual Reset to Offset Thermal Loads Change for PID Controller ASHRAE OR-10-030 Thermal Environment around Strong Heat Source with Single-Sided Natural Ventilation ASME/BPVC CASE N-661-2 N-661-2 Alternative Requirements for Wall Thickness Restoration of Class 2 and ... ASME/BPVC CASE N-786 N-786 Alternative Requirements for Sleeve Reinforcement of Class 2 and 3 Modera... ASME/BPVC CASE N-812 N-812 Alternate Creep-Fatique Damage Envelope for 9Cr-1Mo-V Steel Section III, ... ASHRAE REFRIGERATION IP CH 44 ICE RINKS ASHRAE REFRIGERATION IP CH 47 CRYOGENICS ASHRAE REFRIGERATION SI CH 44 ICE RINKS ASME/BPVC CASE N-793 N-793 Extruded Steel Sleeves With Parallel Threaded Ends Section III, Division ... ASME/BPVC CASE N-654 N-654 Acceptance Criteria for Flaws in Ferritic Steel Components 4 in. and Grea... ASTM E446 Русский Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thic... ASME/BPVC CASE N-561-2 N-561-2 Alternative Requirements for Wall Thickness Restoration of Class 2 and ... ASME/BPVC CASE N-706-1 N-706-1 Alternative Examination Requirements of Table IWB-2500-1 and Table IWC-... ASME/BPVC CASE N-510-1 N-510-1 Borated Stainless Steel for Class CS Core Support Structures and Class ... ASME/BPVC CASE N-562-2 N-562-2 Alternative Requirements for Wall Thickness Restoration of Class 3 Mode... ASME/BPVC CASE N-504-4 N-504-4 Alternative Rules for Repair of Classes 1, 2, and 3 Austenitic Stainles... ASME/BPVC CASE N-741 N-741 Use of 22Cr-5Ni-3Mo-N (Alloy UNS S32205 Austenitic/Ferritic Duplex Stainl... ASME/BPVC CASE N-469-1 N-469-1 Martensitic Stainless Steel for Classes 1, 2, and 3 Components Section ... ASME/BPVC CASE N-789 N-789 Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate-... ASME/BPVC CASE N-453-3 N-453-3 Nickel-Chromium-Molybdenum-Copper Stainless Steel (UNS N08925 and N0892... ASHRAE AB-10-002 Measured and Predicted Pressure Loss in Corrugated Spiral Duct