Подбока проектов по запросу:

WRC BULLETIN 402 Creep-Fatigue Damage Assessment In Type 316 Stainless Steel Under Uniaxial And ... WRC BULLETIN 401 UNDERWATER WET WELDING OF STEEL - To Purchase Call 1-800-854-7179 USA/Canada or... WRC BULLETIN 400 INTERPRETIVE REPORT ON WELDABILITY TESTS FOR HYDROGEN CRACKING OF HIGHER STRENG... WRC BULLETIN 399 THE INFLUENCE OF CONSUMABLE COMPOSITION AND SOLIDIFICATION ON INCLUSION FORMATI... WRC BULLETIN 384 IMPROVING STEEL SPOT WELD FATIGUE RESISTANCE: STUDY I: EFFECT OF TEMPER CYCLE, ... WRC BULLETIN 375 THE SIGNIFICANCE OF THE A/W RATIO ON FRACTURE TOUGHNESS OF A-36 STEEL - To Purc... WRC BULLETIN 373 RESEARCH ON MODERN HIGH STRENGTH LOW ALLOY STEEL WELDING - To Purchase Call 1-8... WRC BULLETIN 371 CHARACTERIZATION OF PWHT BEHAVIOR OF 500 N/MM2 CLASS TMCP STEELS - To Purchase ... WRC BULLETIN 369 NITROGEN IN ARC WELDING - A REVIEW - To Purchase Call 1-800-854-7179 USA/Canada... WRC BULLETIN 365 RECOMMENDED PRACTICES IN ELEVATED TEMPERATURE DESIGN: A COMPENDIUM OF BREEDER R... WRC BULLETIN 358 THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTU... WRC BULLETIN 354 FAILURE ANALYSIS OF A SERVICE-EXPOSED HOT REHEAT STEAM LINE IN A UTILITY STEAM ... WRC BULLETIN 351 AN ANALYTICAL COMPARISON OF SHORT CRACK AND DEEP CRACK CTOD FRACTURE SPECIMENS ... WRC BULLETIN 348 REPAIR WELDING OF SERVICE EXPOSED CR-MO STEEL WELDMENTS - To Purchase Call 1-80... WRC BULLETIN 345 ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A... WRC BULLETIN 342 STAINLESS STEEL WELD METAL: PREDICTION OF FERRITE CONTENT - To Purchase Call 1-... WRC BULLETIN 340 INTERPRETIVE REPORT ON THE MECHANICAL PROPERTIES OF BRAZED JOINTS - To Purchase... WRC BULLETIN 337 EXPERIMENTAL VALIDATION OF THE EVALUATION OF REINFORCED OPENINGS IN LARGE STEEL... WRC BULLETIN 336 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS - FOURTH EDITION... WRC BULLETIN 334 REVIEW OF PROPERTIES OF THERMO-MECHANICALLY CONTROLLED PROCESSED STEELS – PRESS... WRC BULLETIN 332 CHARACTERISTICS OF HEAVYWEIGHT WIDE-FLANGE STRUCTURAL SHAPES ; DATA SURVEY ON M... WRC BULLETIN 331 METALLURGICAL INVESTIGATION ON THE SCATTER OF TOUGHNESS IN THE WELDMENT OF PRES... WRC BULLETIN 330 THE FRACTURE BEHAVIOR OF A588 GRADE A AND A572 GRADE 50 WELDMENTS ; EFFECTS OF ... WRC BULLETIN 328 SPECIMEN THICKNESS EFFECTS FOR ELASTIC-PLASTIC CTOD TOUGHNESS OF AN A36 STEEL ;...